PowerFill™ is the economical solution for areas with difficult grounding problems. It is highly conductive wet or dry yet does not require moisture to lower the resistance of a grounding system. PowerFill™ carries an NSF certification (Certified toNSF/ANSI standard 60) enabling installation around underground potable water systems. PowerFill™ also contains a corrosion inhibitor which forms a film on the copper creating a barrier against corrosion.

PowerFill™ is designed to be used in conjunction with all standard copper grounding equipment allowing for a greater variance in design that would otherwise be uneconomical.

PowerFill™ can be poured in dry or pumped in slurry form.  No tamping required.  It is very worker friendly. No special tools are required.

Advantages:

• Positive low resistance, electrical connection to the earth.
• Compatible with all copper grounding systems.
• Does not contain any hazardous chemicals.
• Will not leech into the ground.
• Never needs recharging.
• Electrically conductive.
• Environmentally friendly.
• Stable permanent ground for the life of the grounding system.
• Contains a corrosion inhibitor to protect copper.
• Will not expand or experience any shrinkage.
• Not affected by freezing.
• Simple to install.
• Excellent shelf life with no performance effects.