Features:

· Can be applied to wet or damp surfaces

· High build (up to 50 mils in one coat)

· Excellent adhesion to wet and damp surfaces

· Safe and environmentally friendly

· Excellent gouge, abrasion and impact resistance

Prepare surfaces by grit blasting to a clean near white finish, SSPC SP-10/ NACE No. 2.

Material for abrasive cleaning shall be the appropriate blend of grit to produce an angular surface profile of 2.5 - 5mils (0.063 - 0.125 mm).

·       Initially stir the base and hardener independently.

·       Add the hardener to base and mix at a slow constant speed so as to not introduce air into the product until a uniform gray color, without streaks, is achieved.  (Make sure all sides of container are scraped.)

·       Apply with Denso Protal Applicator Pad, Denso Protal 9" Roller, or brush.  (If applying to wet surface, displace water as the coating is applied.)

·       A wet film thickness gauge shall be used periodically to measure mil thickness throughout the application process.