Tinker & Rasor Model AP/W Holiday Detector

The latest in Holiday Detector Technology, Tinker & Rasor introduces the completely redesigned Model AP/W high voltage holiday detector. The Model AP/W has built upon the advancement of the Model APS and packaged them into a belt worn instrument to provide a holiday detector with the application flexibility to move from pipe, to tank, to concrete and beyond. This pulsating DC holiday detector with regulated voltage has a range 800 volts to 35,000 volts, giving complete coverage for coating specifications.

The Model AP/W includes the integrated peak reading voltmeter, also used in the Model APS, to measure and display the output voltage being applied to the structure.

Other significant features include the unique T&R Safety Handle. The Safety Handle allows the user much more control over the instrument and does not allow the instrument to be left energized when unattended. This feature provides safety not only for the operator but also for all others sharing a job site.

The Model AP/W main instrument is worn on a belt, keeping most of the weight on the operator and not contributing to arm fatigue when used on tanks, floors, walls or other non-pipe structures.

· 800 volts to 35,000 volts in one instrument

· Safety feature for increased jobsite safety

· Digital voltmeter display

· LED Holiday Indicator-Easily seen in bright daylight

· Regulated voltage

· Large push button controls

· Greater battery efficiency

· Compatible with other Tinker & Rasor holiday detector components and accessories

Of the new features, one of the most important is the safety switch. This trigger system provides greater jobsite safety for both the operator and nearby personnel and is very easy to use. Simply release the trigger, and the instrument instantly turns off. The handle must be held down on the grip to operate the instrument, and the unit is shut down immediately when the handle is released. This feature will increase jobsite safety as an instrument cannot be left energized while unattended. After setting the voltage, the instrument remembers the setting and the range, so the instrument can be turned on and off as much as necessary without requiring further adjustments.

The instrument is controlled by an electronics package contained within the water impenetrable cover of the instrument. All control switches are push button operates, with large operational areas, easy to manipulate while wearing gloves. Controls include On, Low and High voltage ranges, LCD voltmeter display, the voltage setting switch, Loud and Louder volume controls and the wand handle release button.

Just below the LCD voltmeter display is the visual alert for holiday indications. This alert is made of a cluster of "super bright" LEDs that are easily seen in bright daylight conditions.

The voltage selection switch is located just above the LCD voltmeter display and is sealed from weather and dust by a screw cap. Using the supplied screwdriver, the dust cap is removed and voltages are set by turning the voltage selector as shown in the graphics. On the Low voltage range, select between 800 volts and 8,000 volts. On the High voltage range, select between 3,500 volts and 35,000 volts.

The LCD voltmeter display shows voltages in kilovolts (kV). So, a voltage setting of 800 volts would be displayed as 0.8 and a voltage selection of 35,000 volts would be shown as 35.0.

· Environment: -10°C to 50°C (14°F to 122°F)

· Dimensions: Shipping/Carrying Case: 41" x 18" x 8", 35 lbs

· Instrument: 6.75" x 8.5" x 3.5", 8 lbs

The Model AP/W comes complete in kit form including:

· Model AP/W instrument and battery

· PowerPak Ground cable, 20'

· Wand Handle, 18", with full circle spring electrode connector (Compax conn.)

· Wand extension handle, 18"

· Battery charger, 115v or 230v AC, selectable

· Screwdriver

· Carrying/storage case

· Instruction manual

· Certificate of Calibration

· And your choice of electrode*

*Electrode choice is made from the Full Circle Spring Electrodes, 2" to 36" pipe diameters, or the Half Circle Spring Electrodes, 2" to 8" pipe diameters or Wire or Silicone-Rubber brush electrodes, 2" to 8" widths. You may choose one electrode per instrument, within the size ranges listed.

The carrying case (on Left) is included with the Model AP/W as well as our other high voltage holiday detectors, Models APS. The carrying case is made of lighter resin materials and is weather and dust sealed. The custom foam inserts keeps the instrument and all components safe and secure during shipping and handling.

The inline wheels and padded handles make for easy mobility, and its streamlined size makes it easy for storage on the truck or in the shop. The latches are strong but easy to open, with a push button lock on each. The case has molded lock catches for your own padlock or other locking mechanism.

·       Check coatings on:

o   Pipelines

§  Internal

§  External

o   Tanks

o   Concrete

o   Sewers

o   Manholes

·       Recommendations:

o   Specified and Approved on specs around the world. Conforms to NACE International RP0188, RP0274, RP0490

Construction:

·       Rugged injection molded resin case

·       Longer PowerPak cable

·       Form fitting design for wearing on hip or over the shoulder

Product(s)

Item #Product NameQuoteSpecs
Model AP/W Tinker & Rasor Model AP/W Holiday Detector PDF

Related Products

Have a Question?
Name:*
Email:*
Phone:
Question:*
Security Code: