Features:

• Eliminates Short Circuits
  • Bolts, sleeves and washers-the major source of short circuits in most isolation assemblies-are eliminated with the ElectroStop™ isolation fitting.
• Eliminates Field Assembly
  • The ElectroStop™ isolation fitting is completely factory assembled and tested. There are no flanges, gaskets, nuts, bolts, sleeves or washers to handle consequently no fluid leaks due to improper field assembly.
• Is Less Expensive
  • Purchase the ElectroStop™ isolation fitting for less than the cost of the component parts of insulated flange assemblies in most pipe sizes. Install the ElectroStop™ isolation fitting for less than the labor costs of installing an insulated flange assembly.
• Is Coated Both Internally and Externally
  • A two part epoxy is sprayed to a thickness of 0.0010-0.012" (0.25 to 0.30mm) to within 2" (50.8mm) of each weld end.
• Is 100% Hydrostatically Tested
  • All ElectroStop™ fittings undergo hydrostatic and cyclic pressure tests at 1.5 times rated operating pressure in accordance with the latest ANSI standards. Testing is conducted between plates or end caps to ensure the most arduous conditions.
• Is 100% Electrically Tested
  • All ElectroStop™ fittings undergo a electrical resistance and voltage test prior to shipping.
• Is Completely Weld Inspected
  • All ElectroStop™ fittings undergo a weld inspection with combinations of ultrasonic (UT), magnetic partical (MT) and dye penetrant (LT) on all welds. In addition, X-ray test can be conducted upon request.
• Is Manufactured in Accordance with ISO 9001:2000 Quality Assurance
  • Control over all stages of production is ensured by close adherence to an in-place and on going ISO 9001:2000 quality assurance program which is constantly monitored and subject to periodic audit.

Warranty

All products are warranted against failure caused by manufacturing defects for a period of one year. Any product found to be so defective and returned within one year from date of shipment will be replaced without charge.

The above warranty is made in lieu of, and we disclaim, any and all other warranties, expressed or implied, including the warranties of merchantability and fitness for a particular purpose, and buyer agrees to accept the products without any such warranties. We hereby disclaim any obligation or liability for consequential damages, labor costs or any other claims or liabilities of any kind whatsoever.

All data supplied is for standard fittings. Please contact factory for nominal diameters, pressures (up to 2500 ANSI), temperatures (up to 160°C, 320°F,) and electrical characteristics not shown. The information is subject to change at the manufacturer's discretion.

Specifications:

• Series: 150# ANSI Class
• Nominal Diameter: 10 in, 254.0 mm
• Wall Thickness: .37 in, 9.5 mm
• Pipe Grade: B
• Dimension A: 12.60 in, 320 mm
• Dimension C: 31.50 in, 800 mm
• Dimension D: 6.22 in, 158 mm
• Dimension E: 12.70 in, 322.6 mm
• Weight: 151.8 lb, 69 kg
• Pressure Rating: 285 psi
• ElectroStop Continuous Operating Pressure: 355 psi
• Test Pressure: 540 psi
• Working Temperature: 14 to 212°F, -10 to 100°C
• Electrical Resistance (Dry Air) @1 kV DC: 25 MΩ
• Breakdown Voltage (Dry Air) @ 50 Hz for 1 minute: 5 kV

Monolithic Isolation Fitting Specifications:

Monolithic Isolation fittings shall be boltless and completely factory assembled in accordance with the appropriate requirements of ASTM, API, DIN and BS codes. All welds shall be butt weld construction. The dielectric isolation material shall be a thermosetting fiberglass epoxy material. Sealing shall be by two (2) static, self energized "O" ring seals housed in accurately machined grooves, fully protected from cavitation in full compliance with ASME design codes. Interior and exterior coating shall be a two part epoxy with a thickness of 12 to 15 mils to within 2" of each end. Testing shall be Electrical (@5 kV, 25 Mohm), Hydraulic (@1.5 x O.P.) and Weld (Ultrasonic/Magnetic Particle/Dye Penetrant). The Monolithic Isolation Fitting shall be the ElectroStop™ Isolation Fitting as manufactured by Pipeline Seal & Insulator, Inc., Houston, Texas.

Quality Assurance

Each monolithic fitting shall be manufactured at a facility that has a Registered ISO 9001:2000 Quality Management System. copy of current ISO 9001:2000 Registration shall be provided with material submittal.