The 3M Direct Bury Splice Kit is a real time saver when installing underground electrical systems. Every component for the splice is included in the kit. The insulator tube is pre-filled, eliminating the chance of the installer using too much or too little sealant. No crimping tools, no waste, no mess. Just quick, reliable underground splices for irrigation and sprinkler systems, landscape lighting and other underground projects of 30 volts or less. Packaged for Quick Shipment 2 Splices per kit, 25 kits per carton · The DBR 6 kit contains 2 Scotchlok R Connectors · Wire Range: 5 #16 AWG through 3 #10 AWG solid or stranded copper wire
|
DBR Specifications:
| Wire Range | Application Temperature Range | Storage Temperature |
| 16-10 AWG | 32 to 120°F 0 to 49°C | 120°F/49°C |
Features
Flexible
· The DBY splice kit meets a wire range of 2-5 #18 AWG through 2 #12's AWG solid or stranded copper wire.
· Sealant does not set up hard, allowing splice to be reworked, without cutting wires (new tube required).
· Application Temperature Range: 32°F to 120°F (0°C to 49°C).
· Storage Temperature: 120°F (49°C) maximum.
Economical
· Insulating gel is already contained in the tube.
· Long-term electrical properties reduce callbacks and rework
Dependable
· Locking fingers in the tube ensure that the Scotchlok™ connector stays in position
· The closed tube cover provides strain relief
· Design protect against corrosion failure
Installation
Strip wires, apply the Scotchlok™ Electrical Spring Connector and twist in a clockwise direction. Insert the splice into the gel-filled insulator tube. Push past the locking fingers to hold the Scotchlok™ connector in place. Position wires in wire channels and snap insulator tube cove closed.
DBR-6 Specifications:
| Wire Range | Agency Listing | Packaging | Application Temperature Range | Storage Temperature |
| 16-10 AWG | CSA and UL | 2 Splices per kit, 25 kits per carton | 32 to 120°F/0 to 49°C | 120°F/49°C |
Features
Flexible
· The DBY splice kit meets a wire range of 2-5 #18 AWG through 2 #12's AWG solid or stranded copper wire.
· Sealant does not set up hard, allowing splice to be reworked, without cutting wires (new tube required).
· Application Temperature Range: 32°F to 120°F (0°C to 49°C).
· Storage Temperature: 120°F (49°C) maximum.
Economical
· Insulating gel is already contained in the tube.
· Long-term electrical properties reduce callbacks and rework
Dependable
· Locking fingers in the tube ensure that the Scotchlok™ connector stays in position
· The closed tube cover provides strain relief
· Design protect against corrosion failure
Installation
Strip wires, apply the Scotchlok™ Electrical Spring Connector and twist in a clockwise direction. Insert the splice into the gel-filled insulator tube. Push past the locking fingers to hold the Scotchlok™ connector in place. Position wires in wire channels and snap insulator tube cove closed.
DBY Specifications:
| Wire Range | Application Temperature Range | Storage Temperature |
| 18-12 AWG | 32 to 120°F 0 to 49°C | 120°F/49°C |
Features
Flexible
· The DBY splice kit meets a wire range of 2-5 #18 AWG through 2 #12's AWG solid or stranded copper wire.
· Sealant does not set up hard, allowing splice to be reworked, without cutting wires (new tube required).
· Application Temperature Range: 32°F to 120°F (0°C to 49°C).
· Storage Temperature: 120°F (49°C) maximum.
Economical
· Insulating gel is already contained in the tube.
· Long-term electrical properties reduce callbacks and rework
Dependable
· Locking fingers in the tube ensure that the Scotchlok™ connector stays in position
· The closed tube cover provides strain relief
· Design protect against corrosion failure
Installation
Strip wires, apply the Scotchlok™ Electrical Spring Connector and twist in a clockwise direction. Insert the splice into the gel-filled insulator tube. Push past the locking fingers to hold the Scotchlok™ connector in place. Position wires in wire channels and snap insulator tube cove closed.
DBY-6 Specifications:
| Wire Range | Agency Listing | Packaging | Application Temperature Range | Storage Temperature |
| 18-12 AWG | CSA and UL | 2 Splices per kit, 25 kits per carton | 32 to 120°F/0 to 49°C | 120°F/49°C |
Features
Flexible
· The DBY splice kit meets a wire range of 2-5 #18 AWG through 2 #12's AWG solid or stranded copper wire.
· Sealant does not set up hard, allowing splice to be reworked, without cutting wires (new tube required).
· Application Temperature Range: 32°F to 120°F (0°C to 49°C).
· Storage Temperature: 120°F (49°C) maximum.
Economical
· Insulating gel is already contained in the tube.
· Long-term electrical properties reduce callbacks and rework
Dependable
· Locking fingers in the tube ensure that the Scotchlok™ connector stays in position
· The closed tube cover provides strain relief
· Design protect against corrosion failure
Installation
Strip wires, apply the Scotchlok™ Electrical Spring Connector and twist in a clockwise direction. Insert the splice into the gel-filled insulator tube. Push past the locking fingers to hold the Scotchlok™ connector in place. Position wires in wire channels and snap insulator tube cove closed.
