ODR Oil Cooled Rectifiers

Rugged, smaller rectifiers for lower output applications under severe conditions; maximum 200 watts and 20 amps single phase.

Standard Features:

  • Heavy duty 11 gauge hot dip galvanized cabinet with hinged top lid and stainless steel hardware.
  • Heavy duty, draw-pull, stainless steel cabinet latches.
  • Wall mount, Pole mount, or Pad mount.
  • Separate instrument compartment with hinged door and stainless steel hardware.
  • Lift-out component rack for the transformer and rectifier stack.
  • Heavy duty transformer with 15% overdesign for reserve capacity.
  • Minimum 18-step voltage control terminal strip taps.
  • 3/16” Grade XX, Phenolic panels.
  • AC Input circuit breaker.
  • Magnetic AC secondary circuit breakers (instead of fuses).
  • Hoyt, separate analog, 2-1/2” round, volt and amp meters.
  • Silicon diodes protected by surge suppressors and current limiting breakers.
  • All electrical connection hardware is Nickel Plated and double-nut or soldered.
  • Multi-strand, high temperature, insulated flexible wiring.
  • Terminal block for AC input wires (Non-Hazardous models only).
  • Variety of AC voltage single phase inputs, 50 or 60 Hertz.
  • AC and/or DC High Energy lightning protection.
  • Communication filters.
  • Meter switches - (Non Hazardous model only).
  • Power-on indicator light.
  • DC failure warning lights.
  • DC circuit breakers.
  • Additional voltage control adjustments.
  • Powder coated cabinet finishes over galvanized coating (white or gray standard).
  • Other options per request of customer.

Ordering Code / Model Number: ODR Oil Cooled

Position #1: MODEL

D = ODR Series, Oil Cooled

Position #2: TYPE

S = Standard Rectifier (Manual taps)

V = Variac Control

Position #3: COOLING

O = Oil Cooled Standard

X = Oil Cooled (Hazardous Location) Class 1, Div. 2

Position #4: STACK TYPE

I = Silicon (recommended)

E = Selenium

Position #5: DC VOLTS

List Maximum DC Voltage Desired

Position #6: DC AMPS

List Maximum DC Amperage Desired

Position #7: AC INPUT

AA = 115/230, 1 phase set for 115 vac

AB = 115/230, 1 phase set for 230 vac

BA = 230/460, 1 phase set for 230 vac

BB = 230/460, 1 phase set for 460 vac

EA = 115/460, 1 phase set for 115 vac

EB = 115/460, 1 phase set for 460 vac

G = 115, 1 phase only

H = 230, 1 phase only

Position #8: SPECIAL FEATURES

C = AC and DC arrestors

K = DC failure warning light

D = DC arrestor

M = DC breaker

E = AC arrestor

P = Additional voltage control link bar taps

G = Communications filter

Q = Other, specify

H = Meter switches*

*For Standard Oil Cooled Rectifiers Only

Product(s)

Item #Product NameQuoteSpecs
ODR Oil Cooled Rectifiers ODR Oil Cooled Rectifiers PDF

Related Products

Have a Question?
Name:*
Email:*
Phone:
Question:*
Security Code: