MC Miller-GX Site Survey Data-Logger #11250

Key MC Miller Voltmeter Characteristics for test site surveys and pipeline surveys:

·       High Voltage Isolation for Operator Safety

o   Tested to 1kV steady-state/15kV transient voltage levels (designed for higher voltage level isolation); meets the IEC Standard for Category 1V environments

·       Analog Pre-Processing & Digital Signal Processing (DSP)

o   Accurate determination of On/Off pair values-voltmeter does not saturate even with superimposed AC signals (up 10 120V) and/or inductive spikes (up to 2 kV) appearing at the input terminals

·       Fast Response Channels (Ranges) Available

o   80ms response time in combination with high input impedance values (up to400MΩ)-accurate On/Off pair readings during fast cycle current interruption, even under high source resistance conditions.

General Specifications:

·       Serial port available for an external GPS receiver connection, if required

·       320 x 240 pixel (3.5 inch) color LCDt ouch-screen (indoor/outdoor viewing).  55-Key alphabetic-order keypad

·       Windows CE 5.0 operating system.  Xscale processor (624MHz).  256 MB SDRAM

·       2GB CF card (non-volatile memory for survey data storage). Serial (RS232) & USB outputs. Bluetooth-enabled

·       Re-chargeable 5000mAh Li-Ion battery (40+ hours of operation).  IP67 rated (1 meter immersion)

·       Satisfies MIL-STD-810F (wind-blown rain). Meets EN 61000-4-2 standard for electrostatic discharge

·       Operating temp range:  -4°F to 122°F(-20°C to 50°C).  Storage temp range (no battery):  -4°F to 140°F (-20°C to60°C)

·       Dimensions:  12.5" x 5.31" x2.31".  Weight: 2.64 lbs

Included Accessories for Both GX Data-Loggers:

·       Hard plastic carry case

·       GPS thumb antenna

·       AC charger/adapter

·       Vehicle charger

·       USB host cables

·       Serial cable