Air Cooled Standard Line Rectifier

The "Standard Line" air cooled, cathodic protection rectifiers are recognized as industry leading in quality, workmanship and service life.  Many years of field-proven service prove their superior design.  Conservative equipment ratings, controlled manufacturing techniques, plus many extra features ensure long and trouble-free operation.

Typical cathodic protection applications for the air cooled rectifier line include pipelines, tank farms, storage fields, and other non-hazardous locations where continuous duty, DC power is required.

Standard Features:

·       Weatherproof to NEMA 3R.

·       Heavy duty 11-gauge hot dip galvanized cabinet with Stainless Steel Hardware.

·       Stainless Steel, perforated screens.

·       Front and side opening doors for easy maintenance.

·       Heavy duty, draw-pull, stainless steel cabinet latch.

·       Slide-out equipment racks, separate Transformer and Stack assemblies for units over 1200 watts.

·       Heavy duty transformer with 15% over-design for reserve capacity.

·       Minimum 18-step voltage control link bar taps.

·       Quick-change, heavy-duty knobs for changing tap link bars.

·       Minimum 5/16" diameter, soldered tap changing studs.

·       3/16" Grade XX, Phenolic front panel.

·       Accessible front panel total precision shunt.

·       Magnetic AC input circuit breaker.

·       Magnetic AC Secondary Breakers on all units less than 100 amps (instead of fuses).

·       Hoyt, separate analog, 2-1/2"round, volt and amp meters.

·       Silicon diodes protected by surge suppressors and current limiting breakers <100 Amps or fuses.

·       All electrical connection hardware is Nickel Plated and double-nut or soldered.

·       Multi-strand, high temperature, insulated flexible wiring.

·       Terminal block for AC input wires.

·       Primary tap change panel for dual input voltages (Single Phase models only).

·       Safety shield panel supplied on all units over 65 Volts DC.